Lenovo Yoga 2 11" 20428 Hard Drive Replacement

ID: 122050

Description: This guide will properly show how to remove and...

Steps:

1. Flip the computer over so the bottom is facing up.
2. Remove the ten 6mm screws with a T5 Torx security screwdriver.

3. Carefully remove the back panel by gently separating the panel from front to back.
4. Take care not to pull any wires or crack the outer shell.

5. Use the Phillips #000 screwdriver to remove the six 3.3 mm screws around the perimeter of the battery.
6. Use the Phillips #000 screwdriver to remove the single 6.75 mm screw from the center of the battery.

7. Gently remove the three pieces of tape securing the Bluetooth/Wi-Fi antenna.

8. Grip the base of the connector with your fingers or pliers, and gently pull the connector straight back towards you to remove it.
9. If possible, do not to pull the connector out by the wires, as this can damage the connector.

10. Carefully remove the battery from the laptop.
11. Take care not to pull out the Bluetooth antenna while removing the battery.

12. Use the Phillips #000 screwdriver to remove the four 3.3 mm screws securing the hard drive to the panel.

13. Lift the hard drive up, turn it over, and remove the connection.