HP Pavilion g7-1368dx Keyboard Replacement

ID: 122125

Description: In this guide, you will learn how to replace...

Steps:

  1. Turn the device over so that the lower case is facing up.
  2. Slide the battery release latch. The battery will pop up.
  3. Step image
  4. Lift and remove the battery from its compartment.
  5. Step image
  6. Loosen the two Phillips #1 screws that connect the service panel to the device.
  7. These are captive screws and cannot be fully removed. They will remain attached to the service panel.
  8. Slide the service panel down and pull it up to remove.
  9. Step image Step image Step image
  10. Remove the one 7 mm Phillips #1 screw securing the keyboard to the device.
  11. Step image
  12. Flip over the device and open the screen.
  13. Step image
  14. Flip the keyboard over and locate the black ribbon cable that attaches the keyboard to the device.
  15. Using a plastic opening tool, flip up the white tab on the zero insertion force connector.
  16. Disconnect the ribbon cable by sliding it out of the ZIF connector.
  17. Remove the keyboard.
  18. Step image Step image
Back