Nikon Coolpix B700 Back Frame Assembly Replacement

ID: 122413

Description: This guide shows how to remove the back frame...

Steps:

1. Use the Phillips screwdriver to remove the two 5.5 mm screws on the left side of the camera.

2. Use the Phillips screwdriver to remove seven 5.5 mm screws from the bottom of the camera.

3. Use the Phillips screwdriver to remove the two 5.5mm screws on the right side of the camera.
4. Open the HDMI flap to remove a 5.5mm screw.
5. Don't forget to replace the hidden screw under the HDMI flap during reassembly.

6. Use the Phillips screwdriver to remove the two 5.5mm screws under the LCD panel.

7. Open the flash assembly and insert the spudger into the slot under the flash unit and twist.
8. While twisting, pry apart the shell to split the camera in half.

9. Be careful not to damage the ribbons that connect the halves together.

10. Place the pry tool under the black latch. Lift gently until the latch flips up.
11. Gently pull the ribbon away from the latch.
12. Be gentle when taking ribbons out and apart because they are fragile.