HP Elitebook 820 G2 Network Card Replacement

ID: 122476

Description: The network card is the chip that allows you to...

Steps:

1. Slide the lever firmly to the left on the back panel.
2. Once the back panel is unlocked, there should be red showing to the right of the lever.

3. Slide the back panel towards you.
4. Lift the back panel to remove it.

5. Use a Phillips #0 screwdriver to remove the 2 mm head screw on the side of the network card.
6. The card will pop up at an angle after the screw is removed like this.

7. After the screw is removed, the card can be wiggled back and forth while gently pulling backwards to take it out of its slot on the motherboard.
8. Disconnect the two leads on the other screw side of the card. You have now removed the network card.
9. The leads and their connections on the card are labeled.