Open the Quickmill 05000A fully automatic espresso machine

ID: 124921

Description: The housing of the 05000A is attached with a...

Steps:

  1. Never forget to unplug the power cord!
  2. Remove the water tank, pulp drawer and bean container.
    3. Step image
  3. Remove two Phillips screws at the top.
  4. Remove four Phillips screws from the back panel. They are very deep and you need a screwdriver with a very long shaft.
  5. Remove three Phillips screws from the bottom of the back panel
    6. Step image Step image Step image
  6. Unscrew the two Phillips screws on both sides of the back.
  7. Then pull the back part backwards. Watch out for the power cord.
    8. Step image Step image Step image
  8. Open the front door.
  9. The front part is still attached with two Phillips screws. turn them out.
    10. Step image Step image
  10. The front part now only hangs with cables on the connection buttons of the control panel. In order to get better access to the brew group or the grinder, it is sufficient to push the front part forward about 10 cm. If that's not enough, you have to free the control panel.
    11. Step image
Back