HP Envy Ultrabook 4-1043cl Cooling Fan Replacement

ID: 127513

Description: This guide is used to help you replace the...

Steps:

1. Flip the laptop over so the bottom is facing you.

2. Remove twelve 7.5 mm screws by using the Phillips #00 screwdriver.

3. Use plastic opening tool to remove the back cover.
4. You might want to remove it slowly and gently because the back cover is very thin and fragile.

5. Remove three 4.2mm screws by using the Phillips #00 screwdriver.

6. Disconnect the battery cable from the motherboard and remove the battery from the device.

7. Remove one 4.2mm screw at the bottom right corner by using the Phillips #00 screwdriver.

8. Disconnect the fan from the motherboard and remove it from the device.