HP Envy Ultrabook 4-1043cl Hard Drive Replacement

ID: 127515

Description: This guide is used to help you replace the hard...

Steps:

1. Flip the laptop over so the bottom is facing you.

2. Remove twelve 7.5 mm screws by using the Phillips #00 screwdriver.

3. Use plastic opening tool to remove the back cover.
4. You might want to remove it slowly and gently because the back cover is very thin and fragile.

5. Remove three 4.2mm screws by using the Phillips #00 screwdriver.

6. Disconnect the battery cable from the motherboard and remove the battery from the device.

7. The hard drive is in the bottom right corner of the device which is packed by a silver metal shell.
8. Use a Phillips #00 screwdriver to remove the four 4.0 mm screws securing the hard drive to the top cover.

9. Use a Phillips #00 screwdriver to remove the four 4.0 mm screws securing the hard drive to the top cover.

10. Pull the hard disk drive out of the connector socket and remove it from the device.