MiTM Pressure Washer CM1400HDEC1 2017 Power Switch Replacement

ID: 127524

Description: Follow these steps to remove or replace the...

Steps:

1. Disconnect all hoses and unplug the power cord before performing any repairs on the Mi-T-M electric pressure washer.

2. Remove the four 59.2 mm-long 4 mm hex socket bolts from the electrical box.

3. Carefully pull the electrical box away from the engine until you have enough space to work inside it, making sure not to strain the cables that are still connected inside.
4. If you have trouble lowering the electrical box, you can disconnect the green power cord wire for more slack.

5. Disconnect the four wires running to the backside of the power switch.
6. These wires may be difficult to remove. If necessary, you can use a pair of pliers to gently pull them up off their contact rails.

7. Use a flathead screwdriver or a pry tool to pry the power switch away from the electrical box.

8. Remove the power switch from the electrical box.