Razer Blade Stealth 2017 Audio and USB-A Port Replacement

ID: 127532

Description: This guide outlines how to replace the audio...

Steps:

1. Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.
2. Use a Torx T5 screwdriver to remove the eight, 3mm screws on the bottom cover of the laptop.
3. Whenever you remove screws from the device, remember to save and label them.

4. Remove the bottom cover of the laptop by sliding it away from the hinge.
5. Do not force the cover up!

6. Use your fingernail to pry up and disconnect the battery from the motherboard.

7. Use a Phillips #00 screwdriver to remove the six, 5mm screws securing the battery.

8. Remove any tape attached to the battery.
9. Use the plastic spudger to pry out the battery.

10. Use a plastic spudger to lift up the module connector.

11. Use a Phillips #00 screwdriver to remove the two, 3mm screws from the USB-A and audio port module.

12. Use a plastic spudger to remove the USB-A and audio port module from the chassis.