Razer Blade Stealth 2017 WiFi Card Replacement

ID: 127534

Description: This guide outlines how to replace the WiFi...

Steps:

1. Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.
2. Use a Torx T5 screwdriver to remove the eight, 3mm screws on the bottom cover of the laptop.
3. Whenever you remove screws from the device, remember to save and label them.

4. Remove the bottom cover of the laptop by sliding it away from the hinge.
5. Do not force the cover up!

6. Use your fingernail to pry up and disconnect the battery from the motherboard.

7. Use a Phillips #00 screwdriver to remove the six, 5mm screws securing the battery.

8. Remove any tape attached to the battery.
9. Use the plastic spudger to pry out the battery.

10. Remove any tape attached to the Wifi card.
11. Use a plastic spudger to disconnect the two coaxial antennae connectors and expose the WiFi card.

12. Use a Phillips #00 screwdriver to remove the single, 2 mm screw from the WiFi card.

13. Remove the WiFi card from the motherboard by sliding it out at an angle.