Razer Blade 15 Keyboard Replacement

ID: 127591

Description:

Steps:

  1. Flip over to the back side of the laptop
  2. Remove the 10 screws at the bottom of the Razer using a T5 screwdriver head
    3. Step image
  3. Unplug the battery and wear the anti-static band before proceeding
  4. Unscrew the six Philips screws around the battery and lift the battery
    5. Step image
  5. Find the SSD and unscrew the single screw
  6. Once it is unscrewed, the SSD will pop up on one side
  7. Carefully remove the SSD and place it to the side
    8. Step image
  8. Locate the two display cables to the left of the left speaker and disconnect both. (one is underneath the other)
  9. Locate and disconnect the four cables
  10. Disconnect one cable that is underneath the SSD
  11. Disconnect another cable that is next to the right fan
  12. Disconnect the final two cables that are to the left of the battery connector
    13. Step image
  13. Unscrew the four screws on the fans (two screws on each)
  14. Make sure to unplug the connector on each of the fans. Lift and remove the fans.
  15. Unscrew the four screws on the speakers (two screws on each)
  16. Make sure to unplug the connector on each of the speakers and place them to the side
    17. Step image
  17. Remove the two screws on each hinge and pick up the black pieces
  18. Locate the seven screws holding down the motherboard and remove them
  19. Remove the plastic headphone jack cover
  20. Lift up the MOBO and place it to the side
  21. Be careful when handling the motherboard and make sure you’re wearing the anti-static band.
    22. Step image
  22. Unscrew the LCD
  23. Slide the LCD connectors through the opening at the top when removing the LCD
  24. Slide the LCD connectors of the new LCD through the opening at the top
  25. Screw the new LCD back into the bottom case
    26. Step image
  26. Make sure all of the cables are in sight once the motherboard has been placed down
  27. Screw in both the motherboard screws and the hinges
  28. Reconnect the motherboard connectors
  29. Place and screw in the fans and speakers
  30. Make sure the SSD has been reconnected and screwed in
  31. Screw the battery back in and reconnect the battery
Back