Razer Naga Trinity Disassembly

ID: 127643

Description: This prerequisite guide is to help users...

Steps:

1. Remove the interchangeable side plate.

2. Remove the mouse's feet using the opening pick.

3. Remove the four 6mm screws by using a JIS #1 screwdriver.

4. Separate the top mouse housing from the bottom mouse housing using the opening pick.
5. Be careful not to tug too hard on the ribbon connector.

6. Unlock the ribbon connector that is held down by the main board clips using the spudger's pointed end.

7. Remove the side housing using the opening pick.

8. Remove the top housing LED 3-Pin connector that is near the main board.