HP Envy x360 15-bp143cl Battery Replacement

ID: 127650

Description: Use this guide to replace a dead or faulty...

Steps:

1. Flip the laptop over.
2. Peel off the rubber strip closest to the hinges.

3. Use a Phillips #1 screwdriver (PH1 bit) to remove the four 6.5mm screws that were underneath the rubber strip.

4. Use a Torx T5 screwdriver (T5 bit) to remove the three 5mm screws near the bottom edge of the laptop.

5. Lift the back panel to remove it from the laptop.
6. Use an opening tool to pry open the back panel if it does not easily lift apart.

7. Use a Phillips #1 screwdriver (PH1) to remove the seven 4mm screws indicated by the gray arrows on the battery.

8. Pull the battery from the connecting port and lift to remove it from the laptop.