MiTM Pressure Washer CM1400HDEC1 2017 Electrical Box Removal

ID: 127677

Description: This is a pre-req guide for the removal of the...

Steps:

  1. Remove the four 59.2 mm-long 4 mm hex socket bolts from the electrical box.
    2. Step image
  2. Carefully pull the electrical box away from the engine until you have enough space to work inside it, making sure not to strain the cables that are still connected inside.
  3. If you have trouble lowering the electrical box, you can disconnect the green power cord wire for more slack.
    4. Step image Step image
Back