Inspiron 7359 2-in-1 Hard Disk Drive Replacement

ID: 127705

Description: The Dell Inspiron 13 7359 2-in-1 is an excellen...

Steps:

  1. Turn off device before starting.
  2. Turn the laptop upside down with the logo facing the surface of the table.
  3. Step image
  4. Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.
  5. Step image Step image
  6. Use a spudger to separate the back cover from the laptop.
  7. Start from one corner and work your way around the edge of the cover.
  8. Be careful not to bend or crack the back cover.
  9. Step image
  10. All hardware components should be exposed.
  11. Step image
  12. Unscrew three 3mm screws with a Phillips #0 screwdriver and remove them.
  13. These screws hold the hdd and removing these screws will make it easier to remove it.
  14. Step image
  15. Lift the hard drive from the left side. Be careful not pull on it.
  16. Pull the SATA cable that's connect to the hard drive and then carefully place the cable on the side.
  17. Step image Step image
Back