HP Envy x360 15m-bq021dx RAM Replacement

ID: 127708

Description: There are many different reasons that you may...

Steps:

1. On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo using a Phillips #0 screwdriver.
2. Unscrew the three (3) screws at the bottom of the photo using a T5 Torx screwdriver.

3. To remove the back cover, use the black spudger to lift up on the edges of the cover.
4. Use a suction cup to assist in lifting the back cover

5. Use the Philips #0 screwdriver to remove six (6) M2.0x3.2 screws from battery.

6. Using the Philips #0 screwdriver, remove the final screw from the battery connected to the SSD storage unit.

7. Lift and pull the front of the battery up and out (away from the connector) to remove.

8. Remove the tape near the RAM storage.

9. Use a small blue opening tool to pry open the protective metal cover.

10. Pull on the silver pins away from the RAM on both sides.

11. Pull the RAM up and out to remove.