Hover-1 Charger Unplugging the Battery

ID: 127733

Description: If you need to disassemble your Hover-1 Charger...

Steps:

1. Flip the hoverboard over so that the warning label is facing up.
2. Remove the twelve 12 mm screws with a Phillips #2 screwdriver.
3. Remove the four 10 mm screws with a Phillips #2 screwdriver.
4. The screws nearest to the wheels may be hard to access. Be sure to use a long, thin screwdriver.

5. Pull the right cover away from the hoverboard to expose the battery.

6. Disconnect the two pronged black and yellow cable.

7. Pull the left cover away from the hoverboard.

8. Disconnect the two pronged black and yellow cable. The battery is now fully disconnected.