PowerA Enhanced Wireless Controller L and R buttons Replacement

ID: 127766

Description: If you've been experiencing issues with the...

Steps:

1. Remove the battery cover by pressing down on the lever located on the top of the cover.
2. Apply pressure until it clicks out of place, and pull it off.

3. Remove all eight screws using the J0 screwdriver.

4. Insert the iFixit opening tool into the seam and gently pry the cover plate up.
5. Remove the cover plate once it is loosened.

6. Remove all three screws securing the motherboard using the J00 screwdriver.
7. Remove the motherboard.

8. Lift the two white latches using the iFixit opening tool.
9. Lift the white covering off.

10. Squeeze the buttons with rubber tweezers and push them in.
11. Grab it from the back and pull it out.