Sony α6500 Lens Mount Replacement

ID: 127778

Description: The lens mount is the part of the camera used...

Steps:

  1. Use a screwdriver to remove four 5mm JIS 00 screws from the lens mount.
  2. Step image Step image
  3. Pull the lens mount off by gently wiggling it until it comes loose.
  4. It is difficult to slide the mount off the metal pin sticking through the lower left side. Pull it off from where the pin is if it gets stuck.
  5. Step image Step image
  6. Remove the metal ring underneath the lens mount.
  7. When replacing the ring, line up the two holes in the ring with the two pins on either side of the mount.
  8. Step image
Back