Microsoft Surface Pro X SSD Replacement

ID: 127830

Description: Use this guide to remove the SSD in a Microsoft...

Steps:

1. Make sure your Surface Pro X is turned off, and laying screen-side down on a soft surface.
2. After turning off your device, make sure to remove the SSD from the Surface before starting any repairs. This will disconnect the battery and prevent damage to the device.
3. Lift the kickstand to at least a 90° angle, so that it is perpendicular to the Surface's screen. The further you open the hinge, the easier it is to access the SSD and SIM card door.

4. Insert a SIM card eject tool or a paperclip into the small hole in the bottom right corner of the SSD and SIM card door, located near the bottom right corner of the Surface.
5. Press firmly to open the door.

6. Lift the SSD and SIM card door and remove it from the Surface.
7. When reinstalling the door, first insert the end of the door with the small tab into the Surface just above the SSD, then lay the rest of the door down.

8. Use a T3 Torx screwdriver to remove the 2.4 mm screw securing the SSD.

9. Use your finger or a spudger to lift the SSD just enough that it clears the edges of its recess.
10. Don't lift the SSD more than you have to—doing so may damage the SSD or its socket.
11. Gently pull the SSD straight out of its socket.
12. When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.