HP Envy x360 m6-w103dx Hard Drive Replacement

ID: 127836

Description: This replacement guide is for the hard drive...

Steps:

1. Before you begin, be sure to power off your laptop.
2. Using an opening pick, remove the 4 rubber feet and 4 screw covers.

3. Unscrew the twelve 6 mm screws from the bottom of the laptop using a Phillips #0 screwdriver.

4. Open the laptop carefully, with the keyboard face up.
5. Pry around the outside of the keyboard with the plastic opening tool until the keyboard can be lifted slightly.
6. When lifting the keyboard do not pull too hard. There are cables that must be disconnected before the keyboard can be removed.

7. Lift the keyboard until you can see the cables connected to the motherboard.
8. Gently lift the tab on each ZIF connector that connects each cable to the motherboard using a spudger. Once each tab is flipped up, the corresponding ribbon cable will come out easily.
9. Detach the keyboard.

10. Disconnect the connector by pushing up the white tab directly above the hard drive.
11. Gently lift the connector to disconnect.

12. Using the plastic opening tool, gently lift the hard drive.
13. Remove the hard drive by lifting it from the other components.