HTC Desire 826 Back Camera Replacement

ID: 127841

Description: This guide will show you how to replace the...

Steps:

1. Find a seam in the back of the device.
2. Insert the plastic spudger into the seam and pry off the back panel.
3. There will be glue, so keep prying until it comes off or you may need to heat up the edges of the device to loosen the adhesive with the iOpener.

4. Remove the 4.0 mm screw above the battery with a T5 Torx screwdriver.
5. Remove the metal bracket with the tweezers.

6. Disconnect the battery cable from the motherboard with the tweezers.

7. Lift the battery with a plastic spudger and remove it from the device.

8. Use a T5 Torx screwdriver to remove the three 4.0 mm screws.

9. Use the spudger to lift the black plastic covering.

10. Use the spudger to lift the green board. The back camera is attached on the side as shown.
11. Use the tweezers to disconnect and remove the camera.