Milwaukee Hackzall 2625-20 Terminal Block Replacement

ID: 127859

Description: If your Milwaukee Hackzall 2625-20 is no longer...

Steps:

1. Remove the screws holding the shell of the device together. Each screw size varies; you will use a T9 Torx screwdriver for one size 7.0 mm.
2. Use a T10 Torx screwdriver to remove one 14.0 mm screw.
3. Use a T15 Torx screwdriver for the remaining eight screws that are 16.0 mm.
4. Remove the casing to reveal all of the internal components.

5. Carefully remove the terminal block from the casing and note that there is a spring set into it.

6. Use a soldering iron to melt any existing soldered attachments.