Milwaukee Hackzall 2625-20 Motor Replacement

ID: 127861

Description: Use this guide to replace the electric motor in...

Steps:

1. Remove the screws holding the shell of the device together. Each screw size varies; you will use a T9 Torx screwdriver for one size 7.0 mm.
2. Use a T10 Torx screwdriver to remove one 14.0 mm screw.
3. Use a T15 Torx screwdriver for the remaining eight screws that are 16.0 mm.
4. Remove the casing to reveal all of the internal components.

5. Find the red and black wire running from the back of the motor to the trigger mechanism.
6. With a soldering iron remove the two solders on the trigger mechanism.

7. Remove the two screws connecting the motor to the gear box with a T15 torx screwdriver.
8. The motor is now free and can be removed from the tool.