Garmin Edge 1000 Back Cover Replacement

ID: 127957

Description: If there is an issue with your Garmin 1000 Edge...

Steps:

1. Be sure the device is properly powered all the way off before starting the replacement.
2. Hold the device front side down. Remove the eight T6 Torx screws along the backside of the device.
3. Pull the front side of the device apart from the back side.

4. Disconnect the bronze SIM card flex cable from the motherboard with your finger.
5. Disconnect the battery cord to completely separate the front cover from the back cover of the device with your finger.