Sony Alpha A350 Front Case Replacement

ID: 128006

Description: This guide will go through step by step on the...

Steps:

1. Using a Phillips #00 Screwdriver, remove the four 5.5mm screws from the bottom of the camera.
2. Using a Phillips #00 Screwdriver, remove the one 4.3mm screw.

3. Using a Phillips #00 screwdriver, remove one 3.6mm screw on the left side of the camera.
4. Open the remote / DC under the rubber flap to reveal a screw.
5. Using the Phillips #00 screwdriver, remove one 4.3mm screw.

6. Open the flash on the top of the camera and remove two 4.3mm screws with a Phillips #00 screwdriver.
7. If the spring guard falls out during deconstruction, gently place the guard over the spring during construction.
8. To open the flash, simply press the button on the left side.

9. Open the plastic SD card door.
10. Using Phillips #00 screwdriver, remove two 4.4 mm screws outside and two 4.4mm screws inside the door.

11. Gently pull the outer front case from the camera.
12. It should fall apart easily if all screws are removed.