Google Nest Wifi Point Teardown

ID: 128027

Description: The Google Nest Wifi Point is a Wi-Fi range...

Steps:

1. The Google Nest Wifi Point opens from the bottom
2. Use the spudger to completely remove the rubber layer. Starting at the power button provides the best leverage.
3. Remove the adhesive layer to expose the 4x T4 screws

4. Remove the 4x T4 screws from the bottom plate of the Google Nest Wifi Point
5. Use the spudger to pry off bottom cover of unit.

6. The bottom portion of the unit is held in place with 5 x T6H screws. Note the 9 LEDs on the Google Nest Wifi Point
7. Once removed, the speaker driver can be exposed as well as the first board that contains 2x LED drivers - Texas Instrument LP5018
8. The speaker is held in place with 4x T8H screws

9. Disconnect the speaker from the main board
10. The main board is connected to a heatsink/sub-chassis with 2x T6H screws
11. Disconnect the 3 antenna wires from the main board

12. The sub-chassis is held in place with 4x T7H screws
13. The sub-chassis also houses 3 antennas
14. The top board contains 3 DMICs as well as a touch sensor - Cypress CY8CMBR3108

15. Synaptics AS-370 SoC
16. Micron MT29F4G08ABAFAH4-IT NAND Flash Memory
17. Nanya Technology NT5CC128M16JR-EK DRAM
18. Samsung K4B4G1646E-BYMA000 DRAM
19. Qualcomm QCA9886 WLAN SoC
20. Nordic Semiconductor N52811 QFAAA0 1922AG Bluetooth SoC