DEXTER POWER 18 V Drill Switcher Replacement

ID: 130158

Description:

Steps:

1. Place the device on the table.

2. Remove the battery from the tool.

3. Remove the 8 tool box screws.

4. Place the screws and the tool part to the side so you do not lose the components.

5. Take the switcher and insert it into the corresponding hole for this component.
6. Be sure to properly position the switcher by hooking it onto the mechanism.

7. Close the tool gently and replace the 8 screws to enclose the tool box.

8. Congratulations! You have successfully completed the repair!