Edco KL14 Belt Guard Replacement

ID: 130233

Description: Follow this guide to remove the belt guard on...

Steps:

1. Before you begin, ensure that the machine is powered down and cool to the touch.
2. Disconnect the spark plug to prevent the engine from accidentally starting up during service:
3. Grab the plastic spark plug cap at the end of the spark plug wire.
4. Firmly pull to disconnect the spark plug cap from the spark plug.

5. To prevent the concrete saw from rolling during service, place wheel chocks in front of and behind a rear wheel.

6. Use a 3/8-inch wrench to remove the two bolts securing the arbor guard.
7. Remove the arbor guard.

8. Use a 3/8-inch wrench to remove the two bolts securing the belt guard.
9. Remove the belt guard.