Automatic Coffee Machine Cecotec Power Matic-Ccino 7000 or Rooma RM-A7 Disassembly

ID: 130254

Description: This is a basic guide to disassembling your...

Steps:

1. Using a T10 screwdriver, remove the eight screws located on the rear panel of the device (4 towards the bottom, and 4 towards the top).

2. Unscrew one PH2 screw.
3. Use a spudger or a thin curved tool such as a dental pick to remove the bean hopper of the burr grinder.
4. Remove the grind selector by pulling the dial directly away from the machine which will remove it from the housing.

5. The Hex screw must be unscrewed in the clockwise direction. Failure to do so could result in damage of the grinding mechanism.
6. Unscrew the one 4mm Hex in a clockwise fashion and remove the black plastic cover over the burrset.
7. Remove the black plastic cover over the burr set.
8. The burr set should not be completely visible.

9. Unscrew the three PH2 screws.
10. Slide the top panel backwards to remove it.

11. Now you should have access to the internal components of the appliance.