Lenovo ThinkPad X1 Carbon (2nd Gen) USB Audio Port Board Replacement

ID: 130475

Description: If speakers or headphones that you plug into...

Steps:

1. Using a Phillips #0 screwdriver, remove the seven 7mm screws holding the back cover onto your computer.

2. Use a plastic opening tool or your fingers to pry off the cover.

3. Using your fingers, disconnect the battery from the motherboard.

4. Using a Phillips #0 screwdriver, unscrew the five 4.3mm screws attaching the battery to the computer.

5. Remove the battery by pulling it directly towards you.

6. Use a Phillips #0 screwdriver to remove the 2.9 mm screw that is holding down the USB audio port board.

7. Undo the clasp under the USB audio port board.

8. Remove the USB audio port board from the laptop.