Shark ION Robot R75 Battery Replacement

ID: 130508

Description: This guide will show the simple procedure of...

Steps:

1. Make sure the robot is shut off by pressing the power button on top.
2. Flip the R75 over so that the underside is facing up.
3. Using a Phillips #1 screwdriver, remove the 4mm screw in the battery cover.
4. Remove the battery cover.

5. Be careful when removing the battery, as it will still be connected to a wire.
6. Slowly pull the white tabs outward to remove the battery.

7. Be careful when removing the connector, as the part can break if too much force is used.
8. Push down on the tab of the battery connector using a set of tweezers and pull the connector away from the robot to free the wire.
9. Remove the battery from the device.