HP Stream 11-y010nr Keyboard Replacement

ID: 130515

Description: Do you need to replace your HP Stream 11-y010nr...

Steps:

1. Gently peel back the two rubber strips that cover the screws on backside of the computer with the needle nose tweezers.
2. Ensure the laptop is turned off.

3. Unscrew the seven 0.4mm screws on the backside of the laptop with the Phillips #0 Screwdriver.

4. Take the opening picks and push them into the seam between the keyboard and the laptop casing.
5. Go all the way around the laptop.

6. Once the cover is loose enough, lift the keyboard up to expose the wiring beneath.
7. Be careful not to pull too hard or fast as there are ribbon cables attached to the keyboard and trackpad.

8. Disconnect the three cables by lifting up on the locking tab of the ZIF connector and pulling the cables out with the needle nose tweezers.
9. Remove the keyboard.