InFocus IN3104 Top Cover Replacement

ID: 130529

Description: Follow these instructions if you need to do a...

Steps:

1. Turn the projector so that the lens is facing you.
2. On the left side of the projector, there is a screw and a knob inside of the small grate.
3. Use a Phillips #1 screwdriver to remove the 6 mm screw that secures top cover.
4. Remove the service cover.

5. Use a Phillips #1 screwdriver to remove the seven 6 mm screws.
6. Use a Phillips #1 screwdriver to remove the two 5 mm screws.
7. Remove the top cover.
8. Do not pull the cover too hard. It may damage the wire that is connected to the motherboard.