Teddy Ruxpin Battery Replacement

ID: 130552

Description: If your Teddy Ruxpin is not turning on you may...

Steps:

  1. Remove the vest covering the back of the bear.
  2. Orient the bear with his back facing upwards and unscrew the single Phillips #2 screw.
  3. Captured screws will stay in place, no need to worry about losing this one!
    4. Step image Step image
  4. Pull the tab outward to remove the protective plate for the batteries.
    5. Step image
  5. Remove all four AA batteries by pushing the positive end down and pulling the battery out toward yourself.
    6. Step image
Back