HP ProBook 450 G4 Hard Drive Replacement

ID: 130555

Description: Your HP ProBook 450 G4 laptop’s hard drive can...

Steps:

1. Power your laptop off.
2. Flip the laptop over.
3. Orient the laptop so the two vents on the bottom face upward and are further away from you.

4. Use the Phillips #0 screwdriver to remove the 6.8 mm screw that secures the vent panel to the laptop.
5. Use the spudger to separate the vent panel from the laptop.
6. Slide the vent panel off the backside of the laptop.

7. Use the Phillips #0 screwdriver to remove the black 3.2mm screw that secures the hard drive to the left side of the laptop.

8. Use the spudger to lift the left side of the hard drive up.
9. Pull the hard drive diagonally to the left to release the hard drive from the laptop.