HP ProBook 450 G4 Disk Drive Replacement

ID: 130619

Description: If your HP ProBook 450 G4 is no longer able to...

Steps:

1. Power your laptop off.
2. Flip the laptop over.
3. Orient the laptop so the two vents on the bottom face upward and are further away from you.

4. Use the Phillips #0 screwdriver to remove the 6.8 mm screw that secures the vent panel to the laptop.
5. Use the spudger to separate the vent panel from the laptop.
6. Slide the vent panel off the backside of the laptop.

7. Use the Phillips #0 screwdriver to remove the black 3.2mm screw that secures the disk drive to the left side of the laptop.

8. Use the spudger to push the disk drive out of the laptop.