Lenovo ThinkPad X1 Carbon 7th Gen Battery Replacement

ID: 130626

Description: Use this guide to replace the battery in your...

Steps:

1. Use a Phillips #1 screwdriver to loosen the five captive screws securing the back cover.

2. Insert an opening pick at a 45˚ angle between the back cover and frame near the rear middle screw.
3. Pry up on the pick to release the clips securing the back cover to the frame.
4. You will hear several clicks while prying up.

5. Lift the back cover up and remove it from the chassis.
6. You will hear several clicks while lifting up.
7. During reassembly, this is a good point to power on your laptop and test all functions before sealing it up. Be sure to power your laptop back down before you continue working.

8. Use tweezers or your fingers to peel back the plastic shield covering the battery connector.

9. Use the flat end of a spudger to pry up on and disconnect the battery cable.

10. Use a Phillips #0 screwdriver to remove the six 4.9 mm-long screws securing the battery.

11. Lift the battery straight out of its recess and remove it.