Shark ION Robot R75 Main Brush Replacement

ID: 130653

Description: The main brush of the Shark ION Robot R75...

Steps:

  1. Push on the two tabs on the edge of the main brush cover and pull up to remove the cover.
    2. Step image
  2. Pull the main brush slightly to the right to remove it from the compartment.
    3. Step image
  3. Remove the rubber end cap indicated by the red circle.
  4. This step is not needed for a replacement. However, it is important for maintenance. Hair will build up in this area over time, and will cause error messages to pop up, as well as stopping the R75 from cleaning and moving.
  5. Inspect this component at least every six months. This time may be less if you have animals.
    6. Step image Step image
Back