HP Pavilion 14-bk061st Screen Replacement

ID: 132192

Description: Using this guide will help you in replacing the...

Steps:

1. Remove the three 5.7 JIS #1 screws from the bottom of the laptop.
2. Remove the two 6.7mm JIS #1 screws from underneath the feet of the laptop close to the exhaust vent.

3. Unclip the back plate using a plastic opening tool.

4. Carefully remove the back plate from the laptop.

5. Remove the five JIS #1 screws that attach the hinges of the screen to the casing of the laptop.

6. Carefully lift the hinges from the encasing and lift the bottom half of the laptop away from the screen.

7. Use the metal spudger to carefully pry off the plastic encasing around the monitor.
8. Use the outside of the screen to remove the plastic encasing to avoid damaging the screen itself.

9. Remove the four JIS #1 screws holding the screen in place.

10. Carefully remove the sticker covering the wire that connects the screen to the motherboard.
11. Disconnect the cable that is connected to the screen.

12. Remove the screen from the laptop.