HP Envy m6-k015dx Touchpad Replacement

ID: 132676

Description:

Steps:

  1. Shut down the computer
  2. Remove all external devices
  3. Unplug the AC adapter
  4. Close the computer
  5. Turn it upside down
  6. Remove the 12 screws from the bottom.
  7. Gently remove the service cover
  8. Disconnect the battery cable from the motherboard.
  9. Remove the 4 screws that hold the battery.
  10. Gently lift the battery out of the computer.
  11. Remove the fan cable
  12. Remove the 2 screws around the fan
  13. Lift the fan up
  14. Unscrew the 3 screws that hold the card reader board to the system
  15. Raise the card reader board from the system
  16. Remove the four screws that pin down the hard drive
  17. Disconnect the harddrive from its connector
  18. Remove the harddrive
  19. Only complete this step if your computer model has a solid state drive
  20. Remove the two screws at the top of the solid state drive
  21. Remove the solid state drive
  22. Remove the thirteen screws around the keyboard bracket
  23. Gently remove the keyboard bracket from its top
  24. Remove the 4 screws on the touchpad's board
  25. Gently lift the touchpad board from the side that the screws were on
  26. Remove the touchpad board
Back