Karcher Pressure Washers 15209900 Pump Removal

ID: 132915

Description: Prerequisite guide only! This guide shows how...

Steps:

  1. Set the motor assembly upright with the pump assembly on the top.
  2. The pump assembly is filled with oil. This step prevents the oil from spilling out when you remove the pump.
    3. Step image
  3. Use a 13mm socket to remove the four long bolts holding the pump assembly to the motor.
  4. Re-assembly tip: The bolts hold the pump under pressure against the motor assembly. During reassembly, gradually tighten the bolts in a cross pattern.
    5. Step image
  5. Lift the pump assembly off of the motor.
    6. Step image Step image
  6. Pour the pump oil out of the motor housing. If the oil looks serviceable, save it for reassembly.
  7. Reassembly tip: The piston assembly is sealed with oil, and the motor housing acts as an oil pan. Before you attach the pump to the motor, fill the piston well with oil, up to the bearing plate.
    8. Step image
Back