One by Wacom Medium Disassembly

ID: 135588

Description: This guide will show you how to disassemble One...

Steps:

1. Remove the pen from the pen holder

2. Remove four rubber feet to reveal four Phillips #1 screws
3. Remove four Phillips #1 screws

4. Use plastic pry tool to open the casing
5. To make this process easier, start prying from corners
6. Continue prying on every side till two casing sides are separated

7. Remove the mainboard from the casing
8. If the USB port has to be replaced, be sure to remove the shielding from the back of the mainboard to avoid damaging it by high temperature