Honda Light Duty Tiller F220K1AT715492 Air Cleaner Housing Replacement

ID: 135632

Description: Use this guide to replace the air cleaner...

Steps:

1. Before you begin, make sure the engine is switched off and cool to the touch.
2. Pull the spark plug connector straight off of the spark plug.

3. Push down on the two tabs at the top of the air filter cover.
4. With the two tabs depressed, swing the top of the cover down.
5. Remove the cover.

6. Pull the air filter out of the housing and remove it.

7. Use an 8 mm socket to remove the following fasteners securing the air cleaner housing:
8. Two silver nuts
9. One black bolt

10. Slide the pink breather tube out of its clip on the back of the air cleaner housing.

11. Use a flathead screwdriver to gently pry the black breather tube off of its connector on the back of the air cleaner housing.

12. Hold the black carburetor hose in place and rotate the air cleaner housing clockwise until you can slide the hose out of its slot on the air cleaner housing.
13. Remove the air cleaner housing.