Dexter 900W Corded Hammer Drill - 900ID2.5 Orange Button Replacement

ID: 135901

Description: By the end of the guide you will have replaced...

Steps:

1. Before you begin, remember to disconnect the mains plug.

2. Remove the handle from the machine.

3. Using a screwdriver or screwdriver, unscrew and open the device.

4. Remove the orange button then replace the new one.

5. Before closing, check that no cable is blocked and that each part is in its place.
6. Tighten the screws to close the device.

7. Finally replace the handle