Dexter 650W Hammer Drill - 650ID2.5 Power Cord Replacement

ID: 135963

Description: This guide shows you how to replace the power...

Steps:

1. Before beginning, remember to unplug the socket from the mains power.

2. Consider removing the machine handle for easier access.
3. Using a power drill or a screwdriver, unscrew and open the device.

4. Lift the switch and unscrew the screws to release the cable.

5. Replace the new power cable and connect the cables to the switch.
6. Place the switch back into its housing.

7. Before closing it back up, check that no cables are trapped and that every part is in its correct place.
8. Tighten the screws to close the device.