Loosening the Saeco Exprelia rear frame

ID: 136099

Description: These instructions may also help with other...

Steps:

  1. Remove all accessory parts like the water reservoir, the brewing assembly as well as the drip try.
  2. Remove all coffee beans from the bean container
  3. Always remove the power cord
  4. Remove the two T10 Torx screws from the bottom of the rear cover.
    5. Step image
  5. Pull the back cover approximately 1 cm (3/8inch) out from the bottom and push it in an upward direction.
    6. Step image
  6. Remove the five T10 Torx screws as marked
  7. the back frame consist of 3 pieces. Lift the top part out first, then each one of the side pieces
    8. Step image Step image
Back