BenQ BL2700 Power Plug Repair

ID: 136115

Description: (1) Pry up the frame all around the perimeter....

Steps:

1. Pry off the frame around the entire perimeter.

2. Unplug the 3 connectors shown in the photo and detach them from the adhesive along the cable.

3. When releasing the cables, a gentle pull is sufficient; the adhesive strips can be reused later.
4. Leave the blue socket attached to the power supply and lift the power supply off the screen panel; if possible, continue working on a different surface and turn the power supply over to do so.

5. Remove the black plastic cover (simply pull it out) and locate the solder points shown.

6. Resolder the 4 shown solder points and, after a short cooling period, reassemble the housing in reverse order.