iPhone 8 Back Glass Replacement

ID: 136277

Description: This guide demonstrates a professional-level...

Steps:

  1. Wire up the Back Glass Separator. Connect the Back Glass Separator with Air Compressor via an air pipe. Switch on the Air Compressor. Open the air compressor valve.
  2. Switch on the Back Glass Separator. Rotate the pressure regulating valve and set the value as 0.4Mpa.
    3. Step image
  3. Place iPhone 8 back glass assembly into the corresponding mold. Press ‘Up’. With the temperature rising to 240℃, press ‘Start’. The back glass assembly is clamped tightly by the mold.
  4. After 200 seconds of heating, mandril of the machine starts to work.
    5. Step image Step image
  5. Remove the back glass after 18 seconds. Remove glue residue on the back glass thoroughly.
  6. iPhone 8 back glass separating has been completed successfully.
  7. Attach a new back glass to the midframe in the end.
    8. Step image
Back