Huawei Y7 2018 (LDN-L21) Display Assembly with Frame Replacement

ID: 136623

Description: Huawei Y7 Prime 2018 LDN-TL10, LDN-L21, LDN-LX2...

Steps:

1. Turn off the device
2. Remove the sim tray

3. Use Plastic tool to separate the back cover
4. With a Phillips screwdriver remove two black screws and the battery flex connector shield
5. Disconnect the battery and the finger print sensor flex cable

6. Remove all screws from the top of the logic board
7. Remove the shield covering the camera connectors
8. Remove the screws and the plastic cover at the bottom of the device
9. Be careful! Different colored screws have different size

10. Disconnect the Screen Flex cable
11. Remove the logic board
12. Note that at the bottom side of board is attached to the display with double-sided tape

13. Now you have to transfer:
14. Receiver
15. Proximity sensor
16. Volume buttons flex
17. Vibration
18. Battery